ORA-06952: Remote end of the communication issued a forward-reset packet.
Cause: Peer program may have aborted
Action: Investigate network problems and try again.
ORA-06953: Not enough virtual memory
Cause: Not enough memory available.
Action: Check VMS process quotas and/or sysgen parameters
ORA-06954: Illegal file name
Cause: Erroneous file name
Action: Check path name for server output file, or SQL*Net Appletalk Logical names and symbols.
ORA-06955: Number of database servers exceed limit
Cause: Too many database connections.
Action: Check ATKSRV_MAXCONparameter in configuration file.
ORA-06956: Failed to get local host name
Cause: Unable to get Appletalk host name.
Action: Check Appletalk configuration.
ORA-06957: No SID is currently available
Cause: Incoming SQL*Net connection specified invalid SID name.
Action: Specify correct SID in connect string and retry.
ORA-06958: Failed to access configuration file
Cause: Unable to access CONFIG.ATK
Action: Check file protections.
ORA-06959: Buffer I/O quota is too small
Cause: Buffered I/O quota exceeded.
Action: Increase BIOlm using AUTHORIZE utility and retry.
ORA-06960: Failed to access log file
Cause: SQL*Net Appletalk listener could not create log file.
Action: Check directory path and protections.
ORA-06970: X.25 Driver: remote host is unknown
Cause: Host name specified in the login (connect string) is unknown.
Action: Check spelling; make sure name is in the X.25 HOST file.
ORA-06973: X.25 Driver: invalid buffer size
Cause: The buffer size specified in the login string must be between 5 and 4096.
Action: Re-submit with valid buffer size.
ORA-06974: X.25 Driver: SID lookup failure
Cause: From the remote host's SQL*Net X.25 server: the database SID, specified in the login (connect) string, was not recognized.
Action: Add the appropriate SID entry to the CONFIG.ORA file on the remote host (and restart the SQL*Net X.25 server).
ORA-06975: X.25 Driver: connect to host failed
Cause: Connection attempt to remote host has failed. Probably means that the SQL*Net X.25 server on the remote host is not up, or the host itself is not up.
Action: Start the SQL*Net X.25 server process on the remote host.
ORA-06976: X.25 Driver: endpoint creation failure
Cause: Process open file quota probably exceeded.
Action: Contact your customer support representative.
ORA-06977: X.25 Driver: X.25 Level 2 failure
Cause: X.25 level 2 is down. X.25 link is not working.
Action: Run system checks to verify functioning of X.25 software. Contact your hardware vendor.
ORA-06978: X.25 Driver: Too many callback tries
Cause: Call back address probably same as called address.
Action: Verify that callback address and called address are different.
ORA-06979: X.25 Driver: server cannot start oracle
Cause: The remote X.25 server was unable to start an ORACLE process on behalf of the client.
Action: Make sure permissions on the remote ORACLE program are correctly set. Contact your system administrator.
ORA-07200: slsid: oracle_sid not set.
Cause: The environment variable $(ORACLE_SID) is not set.
Action: Set ORACLE_SID environment variable.
ORA-07201: slhom: oracle_home variable not set in environment.
Cause: $(ORACLE_HOME) environment variable not set.
Action: Set ORACLE_HOME.
ORA-07202: sltln: invalid parameter to sltln.
Cause: The sltln name translation routine was called with invalid arguments. The input, or output stings were either NULL or 0 length.
Action: Probable internal oracle error. Contact customer support.
ORA-07203: sltln: attempt to translate a long environment variable.
Cause: A string was passed to sltln containing a long environment variable. sltln accepts environment names of 30 or less characters.
Action: Shorten environment variable name to less than 30 characters.
ORA-07204: sltln: name translation failed due to lack of output buffer space.
Cause: The sltln routine is given a maximum length buffer to expand the name into. An overflow of this buffer occurred.
Action: Possible internal error. Check output buffer length stored in sercose[0]. Pathnames are limited to 255 characters.
ORA-07205: slgtd: time error, unable to obtain time.
Cause: Time() system call returned an error. Possible OS error.
Action: Check additional information returned. Contact customer support.
ORA-07206: slgtd: gettimeofday error, unable to obtain time.
Cause: Gettimeofday() system call returned an error. Possible OS error.
Action: Check additional information returned. Contact customer support.
ORA-07207: sigpidu: process ID string overflows internal buffer.
Cause: The sigpidu routine is given a maximum length buffer to hold process ID string. An overflow of this buffer occurred.
Action: Internal error. Contact customer support.
ORA-07208: sfwfb: failed to flush dirty buffers to disk.
Cause: The fsync system call returned an error. Possible OS error.
Action: Check additional information returned. Contact customer support.
ORA-07209: sfofi: file size limit was exceeded.
Cause: The size of the file to be opened exceeded the OS limit imposed on this process.
Action: Run osh to increase the file size limit.
ORA-07210: slcpu: getrusage error, unable to get cpu time.
Cause: Getrusage system call returned an error. Possible OS error.
Action: Check additional information returned. Contact customer support.
ORA-07211: slgcs: gettimeofday error, unable to get wall clock.
Cause: Gettimeofday system call returned an error. Possible OS error.
Action: Check additional information returned in OS reference manual. Contact customer support.
ORA-07212: slcpu: times error, unable to get cpu time.
Cause: times system call returned an error. Possible OS error.
Action: Check additional information returned. Contact customer support.
ORA-07213: slgcs: times error, unable to get wall clock.
Cause: times system call returned an error. Possible OS error.
Action: Check additional information returned in OS reference manual. Contact customer support.
ORA-07214: slgunm: uname error, unable to get system information.
Cause: uname system call returned an error. Possible OS error.
Action: Check additional information returned in OS reference manual. Contact customer support.
ORA-07215: slsget: getrusage error.
Cause: Getrusage system call returned an error. Possible OS error.
Action: Check additional information returned. Look for information in OS reference. Contact customer support.
ORA-07216: slghst: gethostname error, unable to get name of current host.
Cause: gethostname system call returned an error. Possible OS error.
Action: Check additional information returned in OS reference manual. Contact customer support.
ORA-07217: sltln: environment variable cannot be evaluated.
Cause: getenv call returned a null pointer.
Action: Set the environment variable and try again.
ORA-07218: slkhst: could not perform host operation
Cause: Unix system() call failed
Action: Examine system error message
ORA-07219: slspool: unable to allocate spooler argument buffer.
Cause: Malloc failed to allocate space to hold spooler arguments.
Action: Check additional information returned in OS reference manual. The process may have run out of heap space. Contact customer support.
ORA-07220: slspool: wait error.
Cause: Wait returned an error, when waiting for spool job to complete. Possible spooler program error.
Action: Check additional information returned. Refer to OS reference manual. Contact customer support.
ORA-07221: slspool: exec error, unable to start spooler program.
Cause: Exec failed when starting line printer spooler command. Likely that either the default line printer command, or ORACLE_LPPROG, is incorrectly set.
Action: Verify default line printer command and ORACLE_LPPROG are set correctly. Set ORACLE_LPPROG to working line printer spooler.
ORA-07222: slspool: line printer spooler command exited with an error.
Cause: The line printer spooler exited with a non-zero return value. This probably indicates an error in spooling file.
Action: Verify that line printer spooler is up. Verify that ORACLE_LPPROG, and ORACLE_LPARG are set properly. Check exit value returned as additional informatin.
ORA-07223: slspool: fork error, unable to spawn spool process.
Cause: Fork system call failed to create additional process. Probable resource limit reached.
Action: Check additional information returned. Retry operation. Contact system administrator.
ORA-07224: sfnfy: failed to obtain file size limit; errno = string.
Cause: The ulimit system call returned an error.
Action: Check errno and contact customer support.
ORA-07225: sldext: translation error, unable to expand file name.
Cause: Additional information returned is error returned from sltln.
Action: Check additional information.
ORA-07226: rtneco: unable to get terminal mode.
Cause: The ioctl call returned an error. Possible OS error.
Action: Check additional information for errno. Contact customer support.
ORA-07227: rtneco: unable to set noecho mode.
Cause: The ioctl call returned an error. Possible OS error.
Action: Check additional information for errno. Contact customer support.
ORA-07228: rtecho: unable to restore terminal to echo mode.
Cause: The ioctl call returned an error. Possible OS error.
Action: Check additional information for errno. Contact customer support.
ORA-07229: slcpuc: error in getting number of CPUs.
Cause: error in mpcntl system call
Action: check errno and contact system administrator
ORA-07230: slemcr: fopen error, unable to open error file.
Cause: Fopen failed to open file.
Action: Try to determine which file was not opened. Check that file exists and is accessible.
ORA-07231: slemcc: invalid file handle, seals do not match.
Cause: Function was called with an invalid argument. The file handle used was not obtained be slemcr.
Action: Internal error. Contact customer support.
ORA-07232: slemcc: fclose error.
Cause: An error was encountered when closing the file. Possible OS error.
Action: Contact system administator.
ORA-07233: slemcw: invalid file handle, seals do not match.
Cause: Function was called with an invalid file handle. File handle was not obtained by slemcr.
Action: Internal error. Contact customer support.
ORA-07234: slemcw: fseek error.
Cause: Unable to seek to desired position in file. Possible OS error. Possible internal error.
Action: Verify that error message file is intact. Try to regenerate error message file. Contact customer support.
ORA-07235: slemcw: fwrite error.
Cause: Unable to write item to file. Possible OS error. Possible permissions problem.
Action: Retry operation.
ORA-07236: slemop: open error.
Cause: Unable to open error file. Possible permissions problem.
Action: Verify permission on error message file. Check additional information for errno.
ORA-07237: slemcl: invalid file handle, seals do not match.
Cause: Function was called with an invalid file handle. Handle was not obtained by previous call to slemop.
Action: Internal error.
ORA-07238: slemcl: close error.
Cause: Unable to close file. Possible OS error.
Action: Contact system administator. Check additional information for errno.
ORA-07239: slemrd: invalid file handle, seals do not match.
Cause: Function was called with invalid file handle. Handle was not obtained by call to slemop.
Action: Internal error. Contact customer support.
ORA-07240: slemrd: seek error.
Cause: Unable to seek to desired position in file. Possible OS error.
Action: Check that error file is still intact. Verify space on device. Contact system administrator. Check additional information for errno.
ORA-07241: slemrd: read error.
Cause: Unable to read file. Possible OS error.
Action: Verify that error file is intact. Regenerate error message file. Contact customer support. Check additional information for errno.
ORA-07242: slembfn: translation error, unable to translate error file name.
Cause: Additional information indicates error returned from sltln.
Action: Check additional information.
ORA-07243: supplied buffer not big enough to hold entire line
Cause: supplied buffer was not big enough
Action: Internal error. Contact customer support. Additional information indicates how big the supplied buffer was.
ORA-07244: ssfccf: create file failed, file size limit reached.
Cause: An attempt was made to create a file that exceeds the process's file size limit.
Action: Run osh to raise the file size limit.
ORA-07245: sfccf: unable to lseek and write the last block.
Cause: An attempt was made to move and write to a bad device address.
Action: Check errno. Possible lack of space on device.
ORA-07246: sfofi: open error, unable to open database file.
Cause: sfofi returns an error.
Action: This is an oracle internal error.
ORA-07247: skgfrfms, skgfrnms: read error, unable to read block from database file
Cause: The ioctl() system call returned an error doing VOL_READ_MIRRORS.
Action: Check errno.
ORA-07248: sfwfb: write error, unable to write database block.
Cause: sfwfb returns an error.
Action: This is an oracle internal error.
ORA-07249: slsget: open error, unable to open /proc/pid.
Cause: The open() system call returned an error.
Action: Check that /proc has the right permissions.
ORA-07250: spcre: semget error, unable to get first semaphore set.
Cause: An error occurred when trying to get first semaphore set.
Action: Check errno. Verify that system is configured to have semaphores. Verify that enough semaphores are available. Additional information indicates how many semaphores were requested.
ORA-07251: spcre: semget error, could not allocate any semaphores.
Cause: Semget failed to even allocate a single semaphore. Either they are all in use or the system is not configured to have any semaphores.
Action: Check to see if all semaphores are in use. Check to see if system is configured to have semaphores. Check errno.
ORA-07252: spcre: semget error, could not allocate semaphores.
Cause: Semget system call returned an error. Possible resource limit problem.
Action: Check errno. Verify that enough semaphores are available in system. If additional errors occur in destroying the semaphore sets then sercose[0] will be non-zero. If this occurs, remove the semaphore sets using ipcrm.
ORA-07253: spdes: semctl error, unable to destroy semaphore set.
Cause: Semctl system call returned an error.
Action: Check semaphore sets. May require manual cleanup. Check additional information returned. Consult OS reference manual.
ORA-07254: spdcr: translation error while expanding ?/bin/oracle.
Cause: An error occurred while translating the name of the oracle executable.
Action: Check sercose[0] for error returned from sltln. Perhaps $(ORACLE_HOME) is not set correctly.
ORA-07255: spini: cannot set up signal handler.
Cause: System failed to set up signal handler.
Action: Check errno and sercose[0] for the signal number that failed.
ORA-07256: sptrap: cannot set up signal handler to catch exceptions.
Cause: System failed to set up signal handler to catch exceptions.
Action: Check errno and sercose[0] for the signal number that failed.
ORA-07257: spdcr: translation error expanding program name.
Cause: Error ocurred when expanding program name ora_PNAME_@. The result of this translation is put in argv[0] of oracle process.
Action: Check error returned by sltln returned in sercose[0].
ORA-07258: spdcr: fork error, unable to create process.
Cause: An error occurred when creating a new process.
Action: Check errno. Perhaps a system limit on the number of processes has been exceeded.
ORA-07259: spdcr: exec error, detached process failed in startup.
Cause: An oracle detached process died shortly after startup. Wait() indicated that a child process terminated.
Action: Check ?/dbs directory for trace or core files. Check errno.
ORA-07260: spdcr: wait error.
Cause: Wait system call returned an error.
Action: Check errno.
ORA-07261: spdde: kill error, unable to send signal to process.
Cause: Kill system call returned an error. Possibly an attempt to destroy an already gone process.
Action: Check errno.
ORA-07262: sptpa: sptpa called with invalid process id.
Cause: This is an internal error.
Action: This is an oracle internal error.
ORA-07263: sptpa: kill error.
Cause: Kill system call returned an error. Possible OS error.
Action: Check errno. Additional information indicates the process ID tested.
ORA-07264: spwat: semop error, unable to decrement semaphore.
Cause: Semop system call returned an error. Semaphore set may not exist.
Action: Check errno. Semaphore ID is returned in sercose[0]. Verify semaphore set exists. A possible cause for this error is that a "shutdown abort" was done while this process was running.
ORA-07265: sppst: semop error, unable to increment semaphore.
Cause: Semop system call returned an error. Semaphore set may not exist.
Action: Check errno. Semaphore ID is returned in sercose[0]. Check semaphore set existence. A possible cause for this error is that a "shutdown abort" was done while this process was running.
ORA-07266: sppst: invalid process number passed to sppst.
Cause: Function was passed an invalid oracle process id.
Action: Internal error.
ORA-07267: spwat: invalid process number.
Cause: Function was passed an invalid oracle process id.
Action: Internal error. Additional information indicates the invalid process id.
ORA-07268: szguns: getpwuid error.
Cause: Getpwuid() could not find an entry in the passwd file for a user.
Action: Add an entry for the user in the passwd file.
ORA-07269: spdcr: detached process died after exec.
Cause: Detached process succesfully execed, but died shortly thereafter. Additional information indicates exit code, and termination status.
Action: Check termination code for information as to why process exited. Check for core dump or trace file.
ORA-07270: spalck: setitimer error, unable to set interval timer.
Cause: An error occurred while trying to set an interval timer. Probable porting problem.
Action: Check errno.
ORA-07271: spwat: invalid oracle process number.
Cause: Function was called with an invalid oracle process number (0).
Action: Internal oracle error.
ORA-07272: spwat: invalid semaphore set id.
Cause: Semaphore ID fetched from SGA was not initialized to valid value. Additional information returned is semaphore set index, and oracle process number.
Action: Oracle internal error. Check semaphore set index. Check oracle process number.
ORA-07273: sppst: invalid semaphore id.
Cause: Semaphore ID fetched from SGA contained an invalid value. Additional information returned is semaphore set index, and oracle process number.
Action: Oracle internal error. Check semaphore set index. Check oracle process number.
ORA-07274: spdcr: access error, access to oracle denied.
Cause: Unable to access "oracle" program. Verify ?/bin/oracle or $ORABCKPRG exist, and are executable.
Action: Check errno returned.
ORA-07275: unable to send signal to process
Cause: The kill system call returned an error. Possibly an attempt to signal a process which does not exist.
Action: Check errno.
ORA-07276: no dba group in /etc/group.
Cause: A group has not been set up for dba users.
Action: Contact system administrator. Set up dba group in /etc/group.
ORA-07277: spdde: illegal pid passed as argument.
Cause: A 0 pid was passed to spdde.
Action: Internal error. .
ORA-07278: splon: ops$username exceeds buffer length.
Cause: Splon constructed an ops$username logon which exceeded the alloted buffer space.
Action: Use a shorter Unix username, or use an oracle username. Contact customer support.
ORA-07279: spcre: semget error, unable to get first semaphore set.
Cause: An error occurred when trying to get first semaphore set.
Action: Check errno. Verify that system is configured to have semaphores. Verify that enough semaphores are available. Additional information indicates how many semaphores were requested.
ORA-07280: slsget: unable to get process information.
Cause: The ioctl call returned an error. Possible OS error.
Action: Check additional information for errno. Contact customer support.
ORA-07281: slsget: times error, unable to get cpu time.
Cause: times system call returned an error. Possible OS error.
Action: Check additional information returned. Contact customer support.
ORA-07282: sksaprd: string overflow.
Cause: The internal buffer is not big enough to hold the archive control string.
Action: Internal restriction. Try a shorter archive control string.
ORA-07283: sksaprd: invalid volume size for archive destination.
Cause: An invalid volume size was specified.
Action: Specify a valid volume size in archive control string.
ORA-07284: sksaprd: volume size specification not terminated properly.
Cause: Some non-numeric text follows the volume size specification.
Action: Enter a correct archive control string.
ORA-07285: sksaprd: volume size should not be specified for a disk file.
Cause: Volume size was specified for a disk file.
Action: If you are archiving to a disk file, do not specify its volume size.
ORA-07286: sksagdi: cannot obtain device information.
Cause: Stat on the log archiving device failed.
Action: Check the returned OSD error for the reason of failure.
ORA-07287: sksagdi: unsupported device for log archiving.
Cause: Log archiving to this device is unsupported.
Action: Try log archiving to a supported device.
ORA-07290: sksagdi: specified directory for archiving does not exist.
Cause: The specified pathname is not a directory.
Action: Verify that the archive destination directory exists.
ORA-07303: ksmcsg: illegal database buffer size.
Cause: The database buffer size must be a multiple of the database block size, and less than the maximum block size.
Action: Verify that the db_block_size parameter is correct in INIT.ORA.
ORA-07304: ksmcsg: illegal redo buffer size.
Cause: The redo buffer size must be a multiple of machine block size.
Action: Verify that the log_buffer INIT.ORA parameter is correctly set.
ORA-07305: ksmcsg: illegal database buffer size.
Cause: The database buffer size must be a multiple of the extended cache mapping size for indirect data buffers to be used.
Action: Verify that the db_block_size parameter is correct in INIT.ORA, or disable the use_indirect_data_buffers parameter.
ORA-07324: smpall: malloc error while allocating pga.
Cause: Malloc library routine returned an error.
Action: Check errno. Possibly out of swap space.
ORA-07327: smpdal: attempt to destroy pga when it was not mapped.
Cause: Smpdal was called when the PGA had not been previously created.
Action: Internal error.
ORA-07339: spcre: maximum number of semaphore sets exceeded.
Cause: The internal buffer is not big enough to hold the number of semaphore set identifiers requested.
Action: Reconfigure OS to have more semaphores per set.
ORA-07345: The datafile name must not contain the string '..'.
Cause: The specified datafile name contains '..'.
Action: Correct the datafile name and retry the operation.
ORA-07346: slnrm: normalized file name is too long
Cause: After normalizing the specified file name, the resulting file name was too long.
Action: Specify the shorter file name and retry the operation.
ORA-07390: sftopn: translate error, unable to translate file name.
Cause: An error occurred while expanding the file name to open. Additional information returns error generated in translation routine.
Action: Lookup additional error code for further information.
ORA-07391: sftopn: fopen error, unable to open text file.
Cause: Fopen library routine returned an error.
Action: Verify existence and permissions.
ORA-07392: sftcls: fclose error, unable to close text file.
Cause: Fclose library routine returned an error.
Action: Possible internal oracle error.
ORA-07393: unable to delete text file
Cause: An error occurred while deleting a text file.
Action: Verify that the file exists and check additional errors.
ORA-07394: unable to append string to text file
Cause: An error occurred while performing a string put operation.
Action: This is an internal error. Check additional information.
ORA-07400: slemtr: translated name for the message file is too long.
Cause: The name for the message file overflows internal buffer.
Action: Try making the complete path-name of the message file shorter by reorganizing the directory hierarchy.
ORA-07401: sptrap: cannot restore user exception handlers.
Cause: The system failed to restore user exception handlers.
Action: Check errno and sercose[0] for the signal number that failed.
ORA-07402: sprst: cannot restore user signal handler.
Cause: The system failed to restore user signal handlers.
Action: Check errno and sercose[0] for the signal number that failed.
ORA-07403: sfanfy: db_writers parameter not valid.
Cause: The db_writers parameter in INIT.ORA exceeds the system-dependent maximum or is less than 0.
Action: Change the db_writers parameter in INIT.ORA.
No hay comentarios:
Publicar un comentario